Home / Products / Cold Room Panels

Insulated panel systems

Cold Room Panels for Chilled and Frozen Storage

JILAN supplies insulated cold room panels for walls, ceilings and floors. Panel core, thickness, metal facing and joint construction are selected around the target temperature, site conditions, hygiene requirements and installation method.

OUTER LAYER

Metal facing

INSULATION CORE

PU or PIR rigid foam

INNER LAYER

Metal facing

Panel construction

What is a cold room panel?

A cold room panel is an insulated sandwich panel used to form the walls, ceiling and, where required, the floor of a temperature-controlled room. It combines an insulation core, protective facings and a sealed joint system in one modular component.

The insulation core sits between two metal facings, which is why cold room panels are also referred to as sandwich panels or coolroom panels.
The suitable construction is not determined by thickness alone. Target temperature, ambient conditions, room size, panel position, surface environment, fire requirements and installation details should be reviewed together.

Modular construction

Walls, ceilings and floors

Configurable surface finish

Project-specific selection

Insulation cores

PU and PIR cold room panels.

The insulation core influences thermal performance, fire-test results, mechanical properties and project cost. These cores are used across cold storage panels and freezer panels; the applicable core, thickness and facing should be confirmed against the target temperature and project conditions.

PU

PU Cold Room Panels

Polyurethane rigid foam is widely used as an insulation core for modular cold room panels. The final specification should be verified against the required operating conditions and project documents.

Density
—
Thermal conductivity
—
Fire classification
—

PIR

PIR Cold Room Panels

Polyisocyanurate rigid foam is an alternative insulation core where the project requires a different verified fire-performance or technical specification. Confirm performance using the applicable test report.

Density
—
Thermal conductivity
—
Fire classification
—
Technical data

Cold room panel specifications.

Complete the values below only from the approved JILAN datasheet and applicable test reports.

Parameter

PU Panel

PIR Panel

Test / reference

Available thickness

—
—
—
Effective width
—
—
—
Maximum / available length
—
—
—
Core density
—
—
—
Thermal conductivity
—
—
—
U-value by thickness
—
—
—
Compressive strength
—
—
—
Bond strength
—
—
—
Fire classification
—
—
—
Facing thickness
—
—
—
Thermal, mechanical and fire-performance figures must identify the panel construction, test standard, test conditions and issuing laboratory. Values from another supplier should not be copied into this table.
Selection guide

How do you choose the right panel?

Panel thickness and construction should be selected from the complete operating conditions, not from target temperature alone.

Direct answer

Start with the thermal target, then check the application.

Review target temperature, maximum ambient temperature, panel position, room dimensions, door use, moisture exposure, hygiene requirements, fire requirements and local building rules. Final selection should be confirmed for the project.

01

Target temperature

Chilled, frozen or other controlled condition.

02

Ambient conditions

Maximum site temperature, humidity and exposure.

03

Panel position

Wall, ceiling or insulated floor application.
04

Surface environment

Hygiene, cleaning, corrosion and impact requirements.
05

Fire requirement

Applicable classification and test standard.

06

Installation method

Joint type, room layout and transport restrictions.

Application condition

Recommended thickness

Verified U-value

Chilled storage condition

—
—

Freezer storage condition

—
—

Lower-temperature condition

—
—

Floor panel application

—
—
Facing and finish

Panel surface options.

Select the facing material and surface profile according to hygiene, corrosion, cleaning, appearance and floor-use requirements.

Pre-painted Steel

Commonly considered for walls and ceilings where a coated, easy-to-clean surface is required.

Facing thickness

Stainless Steel

Considered for hygiene-sensitive or more demanding corrosion environments, subject to the required grade.

Grade / thickness

Embossed Metal

A textured facing option that may be considered for selected wall or floor applications.

Material / thickness

Anti-slip Floor Finish

Floor-facing selection should account for traffic, cleaning, moisture and required load conditions.

Material / load

Surface Profile

Flat, ribbed or other profiles may be offered according to the confirmed production range.

Available profiles

Colour

Colour availability should be confirmed against the selected facing material and production batch.

Colour reference
Panel connections

Joint systems and installation.

The joint design affects alignment, sealing, assembly method and the continuity of the insulated envelope.

CAM-LOCK

Cam-lock Panel Joint

Embedded cam locks draw adjacent panels together during assembly. Joint geometry, gaskets and sealant requirements should be confirmed for the selected panel system.

TONGUE + GROOVE

Tongue-and-Groove (Plug-in) Panel Joint

A tongue-and-groove connection aligns adjacent panels for modular assembly. Fixing and sealing details depend on the panel profile and installation conditions.

Cam-lock joints use embedded mechanical locks to draw panels together during on-site assembly, while tongue-and-groove (plug-in) joints rely on a fitted profile for alignment. The suitable joint type depends on the panel system and installation method and should be confirmed for the project.

Technical confidence

Evidence to confirm before ordering.

Match the quotation and approved panel specification to the relevant product documents.

01

Technical Datasheet

Document number: —

02

Fire Test Report

Standard / report: —

03

Thermal Test Data

Method / conditions: —

04

Quality Inspection

Inspection record: —

Frequently asked

Cold room panel FAQs.

A cold room panel is an insulated sandwich panel used to form the walls, ceiling and, where required, the floor of a temperature-controlled room. It combines an insulation core, protective facings and a sealed joint system.
Panel thickness should be selected from the target temperature, ambient conditions, room application, panel position and required thermal performance. Final thickness should be confirmed for the specific project.
PU (polyurethane) and PIR (polyisocyanurate) are both rigid foam insulation cores used in cold room panels. They can differ in fire-test performance, thermal properties and mechanical properties, so the applicable classification, thermal data and test report should be confirmed separately for each construction before final selection.
The facing should be selected from hygiene, cleaning, corrosion, impact, appearance and floor-use requirements. Send the application environment so suitable available options can be reviewed.
A U-value measures how much heat passes through a panel per square metre for each degree of temperature difference between its two sides. A lower verified U-value means lower heat transfer for a given panel construction and thickness, but comparisons must use the same test method and conditions.
Provide room dimensions, target temperature, panel application, required thickness or thermal target, core material, facing material, joint type, quantity, destination and any applicable fire or hygiene requirements.

Request a cold room panel quote

Share the room conditions and required panel construction for review.
Your information is used only to review and respond to your enquiry.